Product Reviews

SmallRig Cold Shoe Mount 2060 Review

A two-mount kit for camera rig owners who need a straightforward way to add a microphone, flash, or LED light to compatible accessories.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Cold Shoe Mount review centers on a simple way to add a standard accessory shoe to a camera cage, handle, plate, or other compatible rig component.

This two-piece aluminum kit suits builders who want to mount a microphone, flash, or LED light without adding an adjustable joint.

SmallRig Shoe Mount Review Summary

The quick verdict

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A two-mount kit for camera rig owners who need a straightforward way to add a microphone, flash, or LED light to compatible accessories.

  • Two cold shoe mounts are included, each measuring 25 × 25 mm (0.98 × 0.98 inches).
  • Aluminum alloy construction.
  • A 1/4-inch-20 threaded hole allows attachment to compatible camera cages, plates, handles, or other accessories.
  • Two M2.5 screws secure the mount, and two 1/4-inch-20 screws are also included.

Pros

  • Two mounts provide a pair of potential accessory positions.
  • Includes both M2.5 and 1/4-inch-20 fasteners, plus hex spanners.

Consider before buying

  • The fixed shoe design does not provide angle adjustment.
  • Compatibility depends on the mounting points available on the cage, plate, or handle; check the fit and supplied screw type for your setup.
Read the full review summary

Each 25 mm square mount has a cold shoe on top and a 1/4-inch-20 threaded hole for attachment to a compatible accessory.

Two M2.5 screws secure the shoe mount itself, while the supplied 1/4-inch-20 screws provide another mounting option. That mix gives a rig builder some flexibility, though the fitting method depends on the accessory and the particular cage.

The package includes two mounts, four M2.5 screws, two 1/4-inch-20 screws, and two hex spanners. Its design is best for a fixed, compact attachment point for a shoe-mounted microphone, flash, or LED.

Check your cage or plate's thread and available space before ordering; the product is specifically noted as unsuitable for DJI and Zhiyun gimbals.

The buying factors

SmallRig Shoe Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting options

Includes 1/4-inch-20 and M2.5 fasteners, with a threaded hole for attachment to compatible rig parts.

8/10

Accessory compatibility

The shoe is intended for microphones, flashes, or LED lights, while the base can attach to compatible cages, plates, or handles.

8/10

Pack value

Two mounts and the basic fasteners and tools make this useful for rigs that need more than one shoe position.

7/10

Build material

Aluminum alloy provides a compact metal mounting piece, though no load rating is supplied.

5/10

Positioning flexibility

The mount offers a fixed shoe position rather than the angle adjustment provided by a ball head.

7/10

Setup guidance

White arrows indicate mounting direction, and the beveled end is designed to help prevent accidental removal.

Key Features and Specifications of SmallRig Shoe Mount

  • Two cold shoe mounts are included, each measuring 25 × 25 mm (0.98 × 0.98 inches).
  • Aluminum alloy construction.
  • A 1/4-inch-20 threaded hole allows attachment to compatible camera cages, plates, handles, or other accessories.
  • Two M2.5 screws secure the mount, and two 1/4-inch-20 screws are also included.
  • The cold shoe can hold compatible accessories such as a microphone, flash, or LED light.
  • White directional arrows and a beveled end help guide mounting and reduce the chance of accidental removal.
  • The package includes two hex spanners; the mount is not suitable for DJI or Zhiyun gimbals.

Pros and Cons of SmallRig Shoe Mount

Pros

  • Two mounts provide a pair of potential accessory positions.
  • Includes both M2.5 and 1/4-inch-20 fasteners, plus hex spanners.
  • Compact 25 mm square footprint can suit a cage or plate with limited room.
  • Directional arrows make the intended mounting orientation easier to identify.

Consider before buying

  • The fixed shoe design does not provide angle adjustment.
  • Compatibility depends on the mounting points available on the cage, plate, or handle; check the fit and supplied screw type for your setup.
  • The product is explicitly unsuitable for DJI and Zhiyun gimbals.

Who Should Buy SmallRig Shoe Mount?

Good fit

Consider this kit if you are building a cage-based camera rig and want compact, fixed shoe points for a microphone, flash, or LED light.

Having two mounts can help when a setup needs more than one accessory position, and the included fasteners cover two common attachment approaches described for the product.

Before buying, check the accessory's mounting holes and the clearance around your intended position.

The product notes that most SmallRig cage installations use the included 1/4-inch-20 screw, while SmallRig Full Cage 1661 uses the M2.5 fastening approach; make sure your cage matches the intended method.

Choose it when a basic, stationary shoe is enough.

The arrows and beveled end are useful design details for orientation and retention, but they do not turn this into an adjustable mount, so plan the shoe direction and accessory placement before tightening it down.

Who should skip it

Skip this model if you need to tilt or reposition an accessory after mounting; this design provides a fixed shoe point. An articulating mount would better match that need.

Do not choose it for DJI or Zhiyun gimbal use, which the product specifically rules out. If your setup uses one of those systems, look for a mount intended for that gimbal.

How the SmallRig Shoe Mount fits into a camera rig

A compact attachment point

At 25 mm square, each mount takes up a small area on a compatible rig part.

That can be useful when a cage or plate already carries other equipment, although the available space and orientation still determine whether a shoe-mounted accessory will clear the camera or neighboring gear.

Two fastening routes

The supplied 1/4-inch-20 screw and M2.5 screws give the kit more than one way to secure the mount.

The product describes different fastening needs for cage installations, so check the thread and instructions for your specific cage rather than assuming the two screw types are interchangeable.

Fixed placement versus angle control

This is a straightforward shoe mount rather than a positioning arm.

It can add a place for an accessory, but it does not offer a ball joint or tilt range; choose a different style if you need to aim a light or monitor independently after installation.

Accessory and gimbal fit

The shoe is intended for a microphone, flash, or LED light, but the product gives no weight limit.

Check your accessory's mounting interface and the rig's intended load before use, and respect the stated exclusion for DJI and Zhiyun gimbals.

Alternatives to SmallRig Shoe Mount

Camera Flash Shoe Mounts alternative

SmallRig Double Ball Head Adapter 1135
4.6/5

1,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Adapter 1135

Choose the 2060 for two fixed mounting points and included fastening hardware. The 1135 is the better fit when you need to adjust an accessory's angle and its weight stays within the stated guidance.

  • The 1135 combines a cold shoe and 1/4-inch screw with a double ball head that rotates up to 180 degrees and locks with a side wingnut; it is not recommended for monitors or LED lights over 1 kg.
  • The 2060 kit supplies two compact fixed shoe mounts with 1/4-inch-20 and M2.5 fastening hardware.

Camera Flash Shoe Mounts alternative

SmallRig Mini Ball Head Mount 3577
4.5/5

700+ ratings

Read Amazon Reviews

SmallRig Mini Ball Head Mount 3577

Choose the 2060 when you want two simple shoe positions. The 3577 suits a lighter accessory within its stated limit when tilt adjustment and a compact ball head matter more than having a two-mount pack.

  • The 3577 is a single mini ball-head mount with up to 138 degrees of tilt, a 1/4-inch screw, a cold shoe base, and a stated support limit of 250 g; it weighs 20 g.
  • The 2060 provides two fixed shoe mounts and no stated accessory weight limit.

Is SmallRig Shoe Mount Worth It?

The SmallRig Cold Shoe Mount 2060 is worth considering for a cage-based rig that needs one or two compact, fixed accessory shoes.

Its aluminum construction, included screws, and two-mount pack make it a practical fit for adding compatible microphones, flashes, or LED lights.

Confirm the thread and space on your rig before ordering, and avoid it for DJI or Zhiyun gimbals. If you need to aim an accessory after mounting, choose an adjustable ball-head style instead.

Your review at a glance

SmallRig Cold Shoe Mount 2060
4.7/5

3,000+ ratings

Read Amazon Reviews

SmallRig Cold Shoe Mount 2060

A two-mount kit for camera rig owners who need a straightforward way to add a microphone, flash, or LED light to compatible accessories.

  • Two cold shoe mounts are included, each measuring 25 × 25 mm (0.98 × 0.98 inches).
  • Aluminum alloy construction.
  • A 1/4-inch-20 threaded hole allows attachment to compatible camera cages, plates, handles, or other accessories.
  • Two M2.5 screws secure the mount, and two 1/4-inch-20 screws are also included.

Written by

yorkscene.com Editorial Team

Editorial team

yorkscene.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Cold Shoe Mount 2060

SmallRig Cold Shoe Mount 2060

A two-mount kit for camera rig owners who need a straightforward way to add a microphone, flash, or LED light to compatible accessories.

  • Two cold shoe mounts are included, each measuring 25 × 25 mm (0.98 × 0.98 inches).
  • Aluminum alloy construction.
Check Video Reviews on Amazon